top of page
Revap Filter Front 1

ReVap Reusable Vapor Filter

SKU: RVP-RVF

The ReVap Filter is a high-performance vapor and particulate filtration system designed for use with aerosol puncture stations and other vapor containment needs. Its refillable design cuts down on waste and lowers long-term costs—without sacrificing performance or reliability. Save about 75% vs. disposable filters. $100 up front, then $75 media refills — about $150–$225 a year vs. $600+ for disposable filters, with 88% less waste.

 

Key Features

  • Modular Design – Easily replace both the activated carbon and HEPA filter media

  • Cost-Effective – Replace only the media ($25 carbon, $50 HEPA) instead of a $300+ disposable filter

  • Standard Fit – Installs directly into ¾" NPT bungs

  • Built to Last – Durable materials and construction

  • Fast Maintenance – Service in minutes with no special tools required

 

What's Included

  • Fully assembled ReVap Filter housing

  • Pre-installed activated carbon and HEPA filter

  • Quick-start guide

 

Recommended Replacements

  • Activated Carbon: Every 4–6 months, or as needed

  • HEPA Filter: Every 4–6 months, or as needed

 

Designed, Manufactured, and Sourced in the USA

  • Specs

    Connection: ¾" NPT, male thread

    Dimensions: 8.3" H × 3.9" dia. (211 × 98 mm)

    Total weight: About 16.7 oz (1.0 lb / 472 g) with media installed

    Housing material: Polypropylene (PP), 3D printed in the USA

    Carbon media: Coconut shell granular activated carbon, 6×12 mesh, 5.48 oz

    Particulate media: HEPA pleated media, rated 99.97% efficient at 0.3 µm

    HEPA element size: 1.5" OD × 0.9" ID × 3" L

    Replacement media weight: 6.08 oz (about 0.4 lb) per change

    Operating temperature: 32°F to 122°F (0°C to 50°C). In hot climates, install indoors or out of direct sunlight. Below freezing, hand-tighten only and avoid impacts.

    Chemical compatibility: Polypropylene housing.

    Recommended media change: Every 4–6 months, or as needed

    Compatibility: Aerosol can puncture systems and drums with a ¾" NPT bung

    Installation: Tool-free

    Made in: USA

  • Cost & Waste Comparison

    Typical disposable filter: $300+ per change, about 3.2 lbs thrown away each time ReVap Filter: $75 per media change, about 0.4 lbs thrown away each time

    3-year cost per drum: $1,900–$3,300 disposable vs. $475–$700 ReVap 3-year waste per drum: ~19–29 lbs disposable vs. ~2.3–3.4 lbs ReVap

    Based on media changes every 4–6 months. Disposable pricing reflects typical market prices for comparable aerosol can recycler filters. Waste figures based on unused filter weight.

$100.00Price
Quantity
bottom of page